ALL COURSES $32.50 EACH
This course provides a general overview of some very important basic knowledge sets necessary for a solid understanding of plant control systems.
During this module you will become familiar with typical Distributed Control Systems (DCS) capabilities.
During this module, you will also learn how to apply your DCS knowledge in order to understand how power plant processes are accessed and controlled using DCS controllers.
An important component of the Control Operator Training Program is a thorough understanding of the Circulating Water System.
During this module, you will be introduced to the Circulating Water System through a series of lessons discussing the function of the Circulating Water System, its major components and component controls.
Once you have become familiar with the components of the Circulating Water System, you will then be introduced to the process controls behind the operation of the system.
Finally, your understanding of the Circulating Water System will be tied together with a discussion on how the system components and process controls come together during Water System Circulation Operation.
Lesson 1: Circulating Water System Function
This lesson focuses on the following topics:
• Circulating Water System Function
• Flow Path
• Circulating Water System Flow Path
• Circulating Water System Data
• Lesson 1 – Quiz
Lesson 2: Major Components
This lesson focuses on the following topics:
• Major Components
• Circulating Water Pumps
• Condenser
• Cooling Tower
• Lesson 2 – Quiz
Lesson 3: Component Controls
This lesson focuses on the following topics:
• Component Controls
• Circulating Water Pump Controls
• Cooling Tower Controls
• Lesson 3 – Quiz
Lesson 4: Process Control
This lesson focuses on the following topics:
• Process Control
• Cooling Tower
• Auto/Manual Control
• Basin Level Setpoint
• Lesson 4 – Quiz
Lesson 5: Circulating Water System Operation
This lesson focuses on the following topics:
• Startup Pre-Requisites
• System Startup
• Normal Operation
• System Shutdown
• Lesson 5 – Quiz
Final – Quiz
An important component of the Control Operator Training Program is a thorough understanding of the Condensate System.
During this module, you will be introduced to the Condensate System through a series of lessons describing the inner workings of the Condensate System from system building blocks (individual components) to the full operation of the system.
Lesson 1: Condensate System Function
This lesson focuses on the following topics:
Functions of the Condensate System
Polishing Demineralizers
Condensate System Flow Path
Condensate System Data
Lesson 1 – Quiz
Lesson 2: Major Components of the Condensate System
This lesson focuses on the following topics:
• Major Components
• Hotwell
• Condensate Pumps
• Low Pressure (LP) Heaters
• Deaerator
Lesson 2 – Quiz
Lesson 3: Component Controls
This lesson focuses on the following topics:
Lesson 3 – Quiz
Lesson 4: Condensate System Process Control
This lesson focuses on the following topics:
• Deaerator Level Control
• LP Heater Level Control
Lesson 4 – Quiz
Lesson 5: Condensate System Operation
This lesson focuses on the following topics:
• Startup Prerequisites
• System Startup
• Normal Operation
• System Shutdown
Lesson 5 – Quiz
Final Exam
This module contains information pertaining to the Feedwater System which is an important component of Control Operator Training Program.
During this module, you will be introduced to the Feedwater System through a series of lessons describing the inner workings of a typical Feedwater System and its associated controls.
Lesson 1: Feedwater System Function
This lesson focuses on the following topics:
• Functions of the Feedwater System
Feedwater System Simplified Flow Path
Startup Valve
Feedwater Block Valve
Lesson 1 – Quiz
Lesson 2: Major Components of the Feedwater System
This lesson focuses on the following topics:
• Major Components
• Deaerator Storage Tank
• Boiler Feed Pumps
• High Pressure Heaters
Quiz Lesson - 2
Lesson 3: Component Controls
This lesson focuses on the following topics:
• Component Controls
• Boiler Feed Pump Controls
• Feedwater Block Valve Controls
• 3rd Point Heater Drain Pump Controls
• High Pressure Heater Vents Controls
Lesson 3 – Quiz
Lesson 4: Feedwater System Process Control
This lesson focuses on the following topics:
• Feedwater Startup Valve Controls
• Boiler Feed Pump Discharge Flow Controls
• Feedwater Master
• HP Heater Level Control
Lesson 4 – Quiz
Lesson 5: Feedwater System Operation
This lesson focuses on the following topics:
• Startup Prerequisites
• System Startup
• Normal Operation
• System Shutdown
Lesson 5 – Quiz
Final Exam
During this module, students will learn about the function of the boiler feed pump, the major components and flow-path of the boiler feed pumps, the boiler feed pump systems, and other important information related to boiler feed pumps.
Students will have their knowledge tested at the end of each lesson through a series of challenging review questions and lesson quizzes. The final challenge for each student will a test of their overall knowledge of the material covered through participation in a final exam at the end of the module.
Learning Objectives
- Understand the function of the boiler feed pump and its flow-path
- Identify the major components of boiler feed pumps
- Understand boiler feed pump component controls
- Understand the boiler feed pump system
Topics Covered The following topics are covered during this course:
- Boiler Feed Pump Function and Flow-path
- Major Components of Boiler Feed Pumps
This course contains information pertaining to the Air Pollution Control System which is an important component of Control Operator Training Program.
During this course, you will be introduced to the Air Pollution Control System through a series of lessons describing the inner workings of a typical Air Pollution Control System and its associated controls.
LEARNING OBJECTIVES
• Describe the function of the Air Pollution Control System
• Describe the flow paths and major components associated with the Air Pollution Control System
• Describe the Air Pollution Control System process control loops and associated methods of control
• Describe the steps required to prepare for and startup an Air Pollution Control System
• Describe the observations made and actions taken during normal operation of the Air Pollution Control System
• Describe the steps required to shut down an Air Pollution Control System
Lesson 1: Air Pollution Control System Function
• Air Pollution Control System Function
• Air Pollution Control System Flow Path
• Lesson Quiz
Lesson 2: Air Pollution Control System Major Components
• Lime Storage
• Lime Preparation
• Scrubber Atomizer
• Baghouse
• Lesson Quiz
Lesson 3: Air Pollution Control System Component Controls
• Lime Transfer Blowers
• Lime Feed Bin Vent Fan
• Bin Activator
• Ball Mill Slaker Auto Sequence Controls
• SDA Damper Controls
• Atomizer Controls
• Baghouse Damper Controls
• Baghouse Reverse Air Fan Control
• Baghouse Cleaning Cycle Selector/Control
• Lesson Quiz
Lesson 4: Boiler Fuel System Process Controls
• Lime Feeder IC Controls
• Lime to Water Ratio Controller
• Lesson Quiz
Lesson 5: Air Pollution Control System Operation
• Startup Prerequisites
• System Startup
• Normal Operation
• System Shutdown Operations
• Lesson Quiz
Final Exam
This course provides a general overview of some very important basic knowledge sets necessary for a solid understanding of plant control systems.
This module contains information pertaining to the Turbine and Auxiliaries System. A typical Turbine and Auxiliaries System and its associated controls are described within this module.
LEARNING OBJECTIVES
- Describe the function of the Turbine and Auxiliaries System
- Describe the flow paths and major components associated with the Turbine and Auxiliaries System
- Describe the Turbine and Auxiliaries System process control loops and associated methods of control
- Describe the steps required to prepare for and startup the Turbine and Auxiliaries System
- Describe the observations made and actions taken during normal operation of the Turbine and Auxiliaries System
- Describe the steps required to shut down the Turbine and Auxiliaries System
- Lesson 1: Turbine and Auxiliaries System Function
- Turbine and Auxiliaries System
- Simplified Flow Path Turbine System
- Turbine Valve Position Graphic
- Turbine Lube Oil System Flow path
- Gland Steam Sealing System
Lesson Quiz
Lesson 2: Major Components of the Turbine and Auxiliary System
Lesson Quiz
Lesson 3: Components Controls
- Drive Group Lube Oil Controls
- Drive Group Turning Gear Controls
- Drive Group Vacuum Breaker Controls
- Condenser Vacuum Pump and Associated Controls
- Drive Group Gland Steam Controls
- Drive Group Aux. Gland Steam Controls
- Drive Group Startup Drains Controls
- Drive Group Hydraulic Fluid Pumps Controls
- Automatic Turbine Startup
Lesson Quiz
Lesson 4: Turbine and Auxiliaries System Process Control
- Turbine and Auxiliaries System Process Control
- Lube Oil Temperature Control
- EHC Fluid Temperature Control
- Gland Steam Pressure Control
- Gland Steam Temperature Control
Lesson Quiz
Lesson 5: Turbine and Auxiliaries System Operation
- Turbine and Auxiliaries System Operation
Lesson Quiz
power plant control room operator training courses-power plant control system, circulating water system, condensate systems, feedwater systems, boiler feed pumps, air pollution control and plant turbine auxilaries system operation & control
States Served: Countries:
Alabama Ala. AL
Alaska Alaska AK
American Samoa AS
Arizona Ariz. AZ
Arkansas Ark. AR
California Calif. CA
Colorado Colo. CO
Connecticut Conn. CT
Delaware Del. DE
Dist. of Columbia D.C. DC
Florida Fla. FL
Georgia Ga. GA
Guam Guam GU
Hawaii Hawaii HI
Idaho Idaho ID
Illinois Ill. IL
Indiana Ind. IN
Iowa Iowa IA
Kansas Kans. KS
Kentucky Ky. KY
Louisiana La. LA
Maine Maine ME
Maryland Md. MD
Marshall Islands MH
Massachusetts Mass. MA
Michigan Mich. MI
Micronesia FM
Minnesota Minn. MN
Mississippi Miss. MS
Missouri Mo. MO
Montana Mont. MT
Nebraska Nebr. NE
Nevada Nev. NV
New Hampshire N.H. NH
New Jersey N.J. NJ
New Mexico N.M. NM
New York N.Y. NY
North Carolina N.C. NC
North Dakota N.D. ND
Northern Marianas MP
Ohio Ohio OH
Oklahoma Okla. OK
Oregon Ore. OR
Palau PW
Pennsylvania Pa. PA
Puerto Rico P.R. PR
Rhode Island R.I. RI
South Carolina S.C. SC
South Dakota S.D. SD
Tennessee Tenn. TN
Texas Tex. TX
Utah Utah UT
Vermont Vt. VT
Virginia Va. VA
Virgin Islands V.I. VI
Washington Wash. WA
West Virginia W.Va. WV
Wisconsin Wis. WI
Wyoming Wyo. WY
Cities Served:
Albuquerque, N.M.
Arlington, Texas
Atlanta, Ga.
Austin, Tex.
Baltimore, Md.
Boston, Mass.
Charlotte, N.C.
Chicago, Ill.
Cleveland, Ohio
Colorado Springs, Colo.
Columbus, Ohio
Dallas, Tex.
Denver, Colo.
Detroit, Mich.
El Paso, Tex.
Fort Worth, Tex.
Fresno, Calif.
Honolulu, Hawaii
Houston, Tex.
Indianapolis, Ind.
Jacksonville, Fla.
Kansas City, Mo.
Las Vegas, Nev.
Long Beach, Calif.
Los Angeles, Calif.
Louisville/Jefferson County, Ky.
Memphis, Tenn.
Mesa, Ariz.
Miami, Fla.
Milwaukee, Wis.
Minneapolis, Minn.
Nashville-Davidson, Tenn.
New Orleans, La.
New York, N.Y.
Oakland, Calif.
Oklahoma City, Okla.
Omaha, Nebr.
Philadelphia, Pa.
Phoenix, Ariz.
Portland, Ore.
Sacramento, Calif.
St. Louis, Mo.
San Antonio, Tex.
San Diego, Calif.
San Francisco, Calif.
San Jose, Calif.
Seattle, Wash.
Tucson, Ariz.
Tulsa, Okla.
Virginia Beach, Va.
Washington, DC
Wichita, Kans
